91 lines
No EOL
4 KiB
Text
91 lines
No EOL
4 KiB
Text
/*****************************************************************************
|
||
* | File : Readme_CN.txt
|
||
* | Author : Waveshare team
|
||
* | Function : Help with use
|
||
* | Info :
|
||
*----------------
|
||
* | This version: V1.0
|
||
* | Date : 2019-07-31
|
||
* | Info : Here is an English version of the documentation for your quick use.
|
||
******************************************************************************/
|
||
This file is to help you use this routine.
|
||
Since our ink screens are getting more and more, it is not convenient for our maintenance, so all the ink screen programs are made into one project.
|
||
A brief description of the use of this project is here:
|
||
|
||
1. Basic information:
|
||
This routine has been verified using the e-paper Driver HAT module.
|
||
You can view the corresponding test routines in the \lib\Examples\
|
||
of the project.
|
||
|
||
2. Pin connection:
|
||
Pin connection You can view it in DEV_Config.h in the \lib\Config\ directory, and repeat it here:
|
||
EPD => Jetson Nano/RPI(BCM)
|
||
VCC -> 3.3
|
||
GND -> GND
|
||
DIN -> 10(SPI0_MOSI)
|
||
CLK -> 11(SPI0_SCK)
|
||
CS -> 8(SPI0_CS0)
|
||
DC -> 25
|
||
RST -> 17
|
||
BUSY -> 24
|
||
|
||
3. Basic use:
|
||
Since this project is a comprehensive project, you may need to read the following for use:
|
||
You can see the 19 functions that have been annotated in lines 19 through 43 of main.c.
|
||
Please note which ink screen you purchased.
|
||
Chestnut 1:
|
||
If you purchased 5.83inch e-paper, then you should remove the comment for the corresponding 39 lines of code, ie:
|
||
// EPD_5in83_test();
|
||
changed to:
|
||
EPD_5in83_test();
|
||
Chestnut 2:
|
||
If you buy a 2.9inch e-paper (B), since the 2.9-inch Type B and Type C are common driver codes,
|
||
Then you should remove the comment for the corresponding 28 lines of code, ie:
|
||
// EPD_2in9bc_test();
|
||
changed to:
|
||
EPD_2in9bc_test();
|
||
Note: For EPD_1in54_V2_test() and EPD_2in13_V2_test(), please note that the V2 logo is attached to the back of your screen.
|
||
|
||
Then you need to execute:
|
||
make
|
||
compile the program, will generate the executable file: epd
|
||
Run:
|
||
sudo ./epd
|
||
If you modify the program, you need to execute:
|
||
make clear
|
||
then:
|
||
make
|
||
|
||
4. Directory structure (selection):
|
||
If you use our products frequently, we will be very familiar with our program directory structure. We have a copy of the specific function.
|
||
The API manual for the function, you can download it on our WIKI or request it as an after-sales customer service. Here is a brief introduction:
|
||
Config\: This directory is a hardware interface layer file. You can see many definitions in DEV_Config.c(.h), including:
|
||
type of data;
|
||
GPIO;
|
||
Read and write GPIO;
|
||
Delay: Note: This delay function does not use an oscilloscope to measure specific values.
|
||
Module Init and exit processing:
|
||
void DEV_Module_Init(void);
|
||
void DEV_Module_Exit(void);
|
||
Note: 1. Here is the processing of some GPIOs before and after using the ink screen.
|
||
2. For the PCB with Rev2.1, the entire module will enter low power consumption after DEV_Module_Exit(). After testing, the power consumption is basically 0;
|
||
|
||
\lib\GUI\: This directory is some basic image processing functions, in GUI_Paint.c(.h):
|
||
Common image processing: creating graphics, flipping graphics, mirroring graphics, setting pixels, clearing screens, etc.
|
||
Common drawing processing: drawing points, lines, boxes, circles, Chinese characters, English characters, numbers, etc.;
|
||
Common time display: Provide a common display time function;
|
||
Commonly used display pictures: provide a function to display bitmaps;
|
||
|
||
\lib\Fonts\: for some commonly used fonts:
|
||
Ascii:
|
||
Font8: 5*8
|
||
Font12: 7*12
|
||
Font16: 11*16
|
||
Font20: 14*20
|
||
Font24: 17*24
|
||
Chinese:
|
||
font12CN: 16*21
|
||
font24CN: 32*41
|
||
|
||
\lib\E-paper\: This screen is the ink screen driver function;
|
||
Examples\: This is the test program for the ink screen. You can see the specific usage method in it. |