292 lines
7.6 KiB
C++
292 lines
7.6 KiB
C++
/**
|
|
* @filename : epd2in13.cpp
|
|
* @brief : Implements for e-paper library
|
|
* @author : Yehui from Waveshare
|
|
*
|
|
* Copyright (C) Waveshare September 9 2017
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documnetation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include <stdlib.h>
|
|
#include "fepd2in13.h"
|
|
|
|
/**
|
|
* full screen update LUT
|
|
**/
|
|
const unsigned char lut_vcomDC[] = {
|
|
0x00, 0x08, 0x00, 0x00, 0x00, 0x02,
|
|
0x60, 0x28, 0x28, 0x00, 0x00, 0x01,
|
|
0x00, 0x14, 0x00, 0x00, 0x00, 0x01,
|
|
0x00, 0x12, 0x12, 0x00, 0x00, 0x01,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00,
|
|
};
|
|
const unsigned char lut_ww[] = {
|
|
0x40, 0x08, 0x00, 0x00, 0x00, 0x02,
|
|
0x90, 0x28, 0x28, 0x00, 0x00, 0x01,
|
|
0x40, 0x14, 0x00, 0x00, 0x00, 0x01,
|
|
0xA0, 0x12, 0x12, 0x00, 0x00, 0x01,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
};
|
|
const unsigned char lut_bw[] = {
|
|
0x40, 0x17, 0x00, 0x00, 0x00, 0x02,
|
|
0x90, 0x0F, 0x0F, 0x00, 0x00, 0x03,
|
|
0x40, 0x0A, 0x01, 0x00, 0x00, 0x01,
|
|
0xA0, 0x0E, 0x0E, 0x00, 0x00, 0x02,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
};
|
|
const unsigned char lut_wb[] = {
|
|
0x80, 0x08, 0x00, 0x00, 0x00, 0x02,
|
|
0x90, 0x28, 0x28, 0x00, 0x00, 0x01,
|
|
0x80, 0x14, 0x00, 0x00, 0x00, 0x01,
|
|
0x50, 0x12, 0x12, 0x00, 0x00, 0x01,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
};
|
|
const unsigned char lut_bb[] = {
|
|
0x80, 0x08, 0x00, 0x00, 0x00, 0x02,
|
|
0x90, 0x28, 0x28, 0x00, 0x00, 0x01,
|
|
0x80, 0x14, 0x00, 0x00, 0x00, 0x01,
|
|
0x50, 0x12, 0x12, 0x00, 0x00, 0x01,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
};
|
|
|
|
Epd::~Epd() {
|
|
};
|
|
|
|
Epd::Epd() {
|
|
reset_pin = RST_PIN;
|
|
dc_pin = DC_PIN;
|
|
cs_pin = CS_PIN;
|
|
busy_pin = BUSY_PIN;
|
|
width = EPD_WIDTH;
|
|
height = EPD_HEIGHT;
|
|
};
|
|
|
|
int Epd::Init() {
|
|
Serial.begin(9600);
|
|
/* this calls the peripheral hardware interface, see epdif */
|
|
if (IfInit() != 0) {
|
|
return -1;
|
|
}
|
|
/* EPD hardware init start */
|
|
Reset();
|
|
|
|
SendCommand(0x01); //POWER SETTING
|
|
SendData(0x03);
|
|
SendData(0x00);
|
|
SendData(0x2b);
|
|
SendData(0x2b);
|
|
SendData(0x03);
|
|
|
|
SendCommand(0x06); //boost soft start
|
|
SendData(0x17); //A
|
|
SendData(0x17); //B
|
|
SendData(0x17); //C
|
|
|
|
SendCommand(0x04);
|
|
// WaitUntilIdle();
|
|
|
|
SendCommand(0x00); //panel setting
|
|
SendData(0xbf); //LUT from OTP£¬128x296
|
|
SendData(0x0d); //VCOM to 0V fast
|
|
|
|
SendCommand(0x30); //PLL setting
|
|
SendData(0x3a); // 3a 100HZ 29 150Hz 39 200HZ 31 171HZ
|
|
|
|
SendCommand(0x61); //resolution setting
|
|
SendData(EPD_WIDTH);
|
|
SendData((EPD_HEIGHT >> 8) & 0xff);
|
|
SendData(EPD_HEIGHT& 0xff);
|
|
|
|
SendCommand(0x82); //vcom_DC setting
|
|
SendData(0x28);
|
|
/* EPD hardware init end */
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* @brief: basic function for sending commands
|
|
*/
|
|
void Epd::SendCommand(unsigned char command) {
|
|
DigitalWrite(dc_pin, LOW);
|
|
SpiTransfer(command);
|
|
}
|
|
|
|
/**
|
|
* @brief: basic function for sending data
|
|
*/
|
|
void Epd::SendData(unsigned char data) {
|
|
DigitalWrite(dc_pin, HIGH);
|
|
SpiTransfer(data);
|
|
}
|
|
|
|
/**
|
|
* @brief: Wait until the busy_pin goes LOW
|
|
*/
|
|
void Epd::WaitUntilIdle(void) {
|
|
while(DigitalRead(busy_pin) == HIGH) { //LOW: idle, HIGH: busy
|
|
DelayMs(100);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief: module reset.
|
|
* often used to awaken the module in deep sleep,
|
|
* see Epd::Sleep();
|
|
*/
|
|
void Epd::Reset(void) {
|
|
DigitalWrite(reset_pin, LOW); //module reset
|
|
DelayMs(200);
|
|
DigitalWrite(reset_pin, HIGH);
|
|
DelayMs(200);
|
|
}
|
|
|
|
/**
|
|
* @brief: set the look-up table register
|
|
*/
|
|
void Epd::SetFullReg(void)
|
|
{
|
|
SendCommand(0X50); //VCOM AND DATA INTERVAL SETTING
|
|
SendData(0x97); //WBmode:VBDF 17|D7 VBDW 97 VBDB 57 WBRmode:VBDF F7 VBDW 77 VBDB 37 VBDR B7
|
|
|
|
unsigned int count;
|
|
SendCommand(0x20);
|
|
for(count=0; count<44; count++) {
|
|
SendData(lut_vcomDC[count]);
|
|
}
|
|
|
|
SendCommand(0x21);
|
|
for(count=0; count<42; count++) {
|
|
SendData(lut_ww[count]);
|
|
}
|
|
|
|
SendCommand(0x22);
|
|
for(count=0; count<42; count++) {
|
|
SendData(lut_bw[count]);
|
|
}
|
|
|
|
SendCommand(0x23);
|
|
for(count=0; count<42; count++) {
|
|
SendData(lut_wb[count]);
|
|
}
|
|
|
|
SendCommand(0x24);
|
|
for(count=0; count<42; count++) {
|
|
SendData(lut_bb[count]);
|
|
}
|
|
}
|
|
|
|
void Epd::SetFrameMemory(const unsigned char* image_buffer) {
|
|
unsigned char Width, Height, data;
|
|
Width = (EPD_WIDTH % 8 == 0)? (EPD_WIDTH / 8 ): (EPD_WIDTH / 8 + 1);
|
|
Height = EPD_HEIGHT;
|
|
|
|
SendCommand(0x10);
|
|
for (int j = 0; j < Height; j++) {
|
|
for (int i = 0; i < Width; i++) {
|
|
SendData(0x00);
|
|
}
|
|
}
|
|
DelayMs(10);
|
|
|
|
SendCommand(0x13);
|
|
for (int j = 0; j < Height; j++) {
|
|
for (int i = 0; i < Width; i++) {
|
|
data = pgm_read_byte(&image_buffer[i + j * Width]);
|
|
SendData(data);
|
|
// Serial.print(data);
|
|
}
|
|
}
|
|
DelayMs(10);
|
|
|
|
SetFullReg();
|
|
DisplayFrame();
|
|
}
|
|
|
|
/**
|
|
* @brief: clear the frame memory with the specified color.
|
|
* this won't update the display.
|
|
*/
|
|
void Epd::ClearFrameMemory() {
|
|
unsigned char Width, Height;
|
|
Width = (EPD_WIDTH % 8 == 0)? (EPD_WIDTH / 8 ): (EPD_WIDTH / 8 + 1);
|
|
Height = EPD_HEIGHT;
|
|
|
|
SendCommand(0x10);
|
|
for (int j = 0; j < Height; j++) {
|
|
for (int i = 0; i < Width; i++) {
|
|
SendData(0x00);
|
|
}
|
|
}
|
|
DelayMs(10);
|
|
|
|
SendCommand(0x13);
|
|
for (int j = 0; j < Height; j++) {
|
|
for (int i = 0; i < Width; i++) {
|
|
SendData(0xFF);
|
|
}
|
|
}
|
|
DelayMs(10);
|
|
|
|
SetFullReg();
|
|
DisplayFrame();
|
|
}
|
|
|
|
/**
|
|
* @brief: update the display
|
|
* there are 2 memory areas embedded in the e-paper display
|
|
* but once this function is called,
|
|
* the the next action of SetFrameMemory or ClearFrame will
|
|
* set the other memory area.
|
|
*/
|
|
void Epd::DisplayFrame(void) {
|
|
SendCommand(0x12);
|
|
DelayMs(100);
|
|
WaitUntilIdle();
|
|
}
|
|
|
|
/**
|
|
* @brief: After this command is transmitted, the chip would enter the
|
|
* deep-sleep mode to save power.
|
|
* The deep sleep mode would return to standby by hardware reset.
|
|
* You can use Epd::Init() to awaken
|
|
*/
|
|
void Epd::Sleep() {
|
|
SendCommand(0X50);
|
|
SendData(0xf7);
|
|
SendCommand(0X02); //power off
|
|
SendCommand(0X07); //deep sleep
|
|
SendData(0xA5);
|
|
}
|
|
|
|
|
|
/* END OF FILE */
|
|
|
|
|