add arduino code

7.5inch_e-paper_code/RaspberryPi/python2/readme.txt

@@ -0,0 +1,92 @@
+/******************************************************************************
+ * File Name          : readme.txt
+ * Description        : Readme file
+ * Date               : 2019-04-08
+ ******************************************************************************
+ *
+ * Copyright (c) 2017 Waveshare
+ * All rights reserved.
+ *
+ * THIS SOFTWARE IS PROVIDED BY COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT 
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT 
+ * SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+  
+  == Development Environment ==
+  * OS: Raspbian for Raspberry Pi
+  * Libraries required: 
+        SPI library of Python
+        PIL (Python Imaging Library) library
+
+  == Raspberry Pi GPIO Pin map ==
+ +-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
+ | BCM | wPi |   Name  | Mode | V | Physical | V | Mode | Name    | wPi | BCM |
+ +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
+ |     |     |    3.3v |      |   |  1 || 2  |   |      | 5v      |     |     |
+ |   2 |   8 |   SDA.1 |   IN | 1 |  3 || 4  |   |      | 5v      |     |     |
+ |   3 |   9 |   SCL.1 |   IN | 1 |  5 || 6  |   |      | 0v      |     |     |
+ |   4 |   7 | GPIO. 7 |   IN | 1 |  7 || 8  | 1 | ALT5 | TxD     | 15  | 14  |
+ |     |     |      0v |      |   |  9 || 10 | 1 | ALT5 | RxD     | 16  | 15  |
+ |  17 |   0 | GPIO. 0 |   IN | 0 | 11 || 12 | 0 | IN   | GPIO. 1 | 1   | 18  |
+ |  27 |   2 | GPIO. 2 |   IN | 0 | 13 || 14 |   |      | 0v      |     |     |
+ |  22 |   3 | GPIO. 3 |   IN | 0 | 15 || 16 | 0 | IN   | GPIO. 4 | 4   | 23  |
+ |     |     |    3.3v |      |   | 17 || 18 | 0 | IN   | GPIO. 5 | 5   | 24  |
+ |  10 |  12 |    MOSI | ALT0 | 0 | 19 || 20 |   |      | 0v      |     |     |
+ |   9 |  13 |    MISO | ALT0 | 0 | 21 || 22 | 0 | IN   | GPIO. 6 | 6   | 25  |
+ |  11 |  14 |    SCLK | ALT0 | 0 | 23 || 24 | 1 | OUT  | CE0     | 10  | 8   |
+ |     |     |      0v |      |   | 25 || 26 | 1 | OUT  | CE1     | 11  | 7   |
+ |   0 |  30 |   SDA.0 |   IN | 1 | 27 || 28 | 1 | IN   | SCL.0   | 31  | 1   |
+ |   5 |  21 | GPIO.21 |   IN | 1 | 29 || 30 |   |      | 0v      |     |     |
+ |   6 |  22 | GPIO.22 |   IN | 1 | 31 || 32 | 0 | IN   | GPIO.26 | 26  | 12  |
+ |  13 |  23 | GPIO.23 |   IN | 0 | 33 || 34 |   |      | 0v      |     |     |
+ |  19 |  24 | GPIO.24 |  OUT | 1 | 35 || 36 | 1 | OUT  | GPIO.27 | 27  | 16  |
+ |  26 |  25 | GPIO.25 |   IN | 0 | 37 || 38 | 0 | IN   | GPIO.28 | 28  | 20  |
+ |     |     |      0v |      |   | 39 || 40 | 0 | IN   | GPIO.29 | 29  | 21  |
+ +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
+ | BCM | wPi |   Name  | Mode | V | Physical | V | Mode | Name    | wPi | BCM |
+ +-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
+
+  == Hardware connection ==
+    EPD    =>    Raspberry Pi
+  * VCC    ->    3.3
+  * GND    ->    GND
+  * DIN    ->    MOSI
+  * CLK    ->    SCLK
+  * CS     ->    24 (Physical, BCM: CE0, 8)
+  * D/C    ->    22 (Physical, BCM: 25)
+  * RES    ->    11 (Physical, BCM: 17)
+  * BUSY   ->    18 (Physical, BCM: 24)
+  
+    == How to use ==
+    1, open spidev.
+        spi is enabled in config.txt:
+        dtparam=spi=on
+    or in shell:
+        sudo raspi-config
+            - 5 Interfacing Options  Configure connections to peripherals
+                - 5 Interfacing Options  Configure connections to peripherals
+        
+    2, install the Python libraries.
+        sudo apt-get install python-pip 
+        sudo pip install RPi.GPIO
+        sudo pip install spidev
+        sudo apt-get install ttf-wqy-zenhei ttf-wqy-microhei
+
+    3, change the current directory to where the demo files located.
+
+    4, run the demo with: 
+        sudo python main.py
+    # if use python3:
+        sudo python3 main.py
+*/
+