add arduino code

2.13inch_e-paper_code/RaspberryPi/python3/epd2in13.py

@@ -0,0 +1,225 @@
+# //*****************************************************************************
+# * | File        :	  epd2in13.py
+# * | Author      :   Waveshare team
+# * | Function    :   Electronic paper driver
+# * | Info        :
+# *----------------
+# * |	This version:   V3.1
+# * | Date        :   2019-03-20
+# * | Info        :   python3 demo
+# * fix: TurnOnDisplay()
+# ******************************************************************************//
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and//or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+
+
+import epdconfig
+from PIL import Image
+import RPi.GPIO as GPIO
+# import numpy as np
+
+# Display resolution
+EPD_WIDTH       = 122
+EPD_HEIGHT      = 250
+
+class EPD:
+    def __init__(self):
+        self.reset_pin = epdconfig.RST_PIN
+        self.dc_pin = epdconfig.DC_PIN
+        self.busy_pin = epdconfig.BUSY_PIN
+        self.cs_pin = epdconfig.CS_PIN
+        self.width = EPD_WIDTH
+        self.height = EPD_HEIGHT
+    lut_full_update = [
+        0x22, 0x55, 0xAA, 0x55, 0xAA, 0x55, 0xAA, 0x11,
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E,
+        0x01, 0x00, 0x00, 0x00, 0x00, 0x00
+    ]
+
+    lut_partial_update  = [
+        0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        0x0F, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+        0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    ]
+        
+    # Hardware reset
+    def reset(self):
+        epdconfig.digital_write(self.cs_pin, GPIO.LOW)
+        epdconfig.digital_write(self.reset_pin, GPIO.HIGH)
+        epdconfig.delay_ms(200) 
+        epdconfig.digital_write(self.reset_pin, GPIO.LOW)         # module reset
+        epdconfig.delay_ms(200)
+        epdconfig.digital_write(self.reset_pin, GPIO.HIGH)
+        epdconfig.delay_ms(200)   
+        epdconfig.digital_write(self.cs_pin, GPIO.HIGH)
+
+    def send_command(self, command):
+        epdconfig.digital_write(self.cs_pin, GPIO.LOW)
+        epdconfig.digital_write(self.dc_pin, GPIO.LOW)
+        epdconfig.spi_writebyte([command])
+        epdconfig.digital_write(self.cs_pin, GPIO.HIGH)
+
+    def send_data(self, data):
+        epdconfig.digital_write(self.cs_pin, GPIO.LOW)
+        epdconfig.digital_write(self.dc_pin, GPIO.HIGH)
+        epdconfig.spi_writebyte([data])
+        epdconfig.digital_write(self.cs_pin, GPIO.HIGH)
+        
+    def wait_until_idle(self):
+        print("busy")
+        while(epdconfig.digital_read(self.busy_pin) == 1):      # 0: idle, 1: busy
+            epdconfig.delay_ms(100)
+        print("free busy")
+
+    def TurnOnDisplay(self):
+        self.send_command(0x22) # DISPLAY_UPDATE_CONTROL_2
+        self.send_data(0xC4)
+        self.send_command(0x20) # MASTER_ACTIVATION
+        self.send_command(0xFF) # TERMINATE_FRAME_READ_WRITE
+        self.wait_until_idle()
+
+    def init(self, lut):
+        if (epdconfig.module_init() != 0):
+            return -1
+        # EPD hardware init start
+        self.reset()
+        self.send_command(0x01) # DRIVER_OUTPUT_CONTROL
+        self.send_data((EPD_HEIGHT - 1) & 0xFF)
+        self.send_data(((EPD_HEIGHT - 1) >> 8) & 0xFF)
+        self.send_data(0x00) # GD = 0 SM = 0 TB = 0
+        
+        self.send_command(0x0C) # BOOSTER_SOFT_START_CONTROL
+        self.send_data(0xD7)
+        self.send_data(0xD6)
+        self.send_data(0x9D)
+        
+        self.send_command(0x2C) # WRITE_VCOM_REGISTER
+        self.send_data(0xA8) # VCOM 7C
+        
+        self.send_command(0x3A) # SET_DUMMY_LINE_PERIOD
+        self.send_data(0x1A) # 4 dummy lines per gate
+        
+        self.send_command(0x3B) # SET_GATE_TIME
+        self.send_data(0x08) # 2us per line
+        
+        self.send_command(0X3C) # BORDER_WAVEFORM_CONTROL
+        self.send_data(0x03)      
+        
+        self.send_command(0X11) # DATA_ENTRY_MODE_SETTING
+        self.send_data(0x03) # X increment; Y increment
+        
+        # WRITE_LUT_REGISTER
+        self.send_command(0x32)
+        for count in range(30):
+            self.send_data(lut[count])
+
+        return 0
+        
+##
+ #  @brief: specify the memory area for data R//W
+ ##
+    def SetWindows(self, x_start, y_start, x_end, y_end):
+        self.send_command(0x44) # SET_RAM_X_ADDRESS_START_END_POSITION
+        self.send_data((x_start >> 3) & 0xFF)
+        self.send_data((x_end >> 3) & 0xFF)
+        self.send_command(0x45) # SET_RAM_Y_ADDRESS_START_END_POSITION
+        self.send_data(y_start & 0xFF)
+        self.send_data((y_start >> 8) & 0xFF)
+        self.send_data(y_end & 0xFF)
+        self.send_data((y_end >> 8) & 0xFF)
+
+##
+ #  @brief: specify the start point for data R//W
+ ##
+    def SetCursor(self, x, y):
+        self.send_command(0x4E) # SET_RAM_X_ADDRESS_COUNTER
+        # x point must be the multiple of 8 or the last 3 bits will be ignored
+        self.send_data((x >> 3) & 0xFF)
+        self.send_command(0x4F) # SET_RAM_Y_ADDRESS_COUNTER
+        self.send_data(y & 0xFF)
+        self.send_data((y >> 8) & 0xFF)
+        self.wait_until_idle()
+        
+    def getbuffer(self, image):
+        if self.width%8 == 0:
+            linewidth = self.width//8
+        else:
+            linewidth = self.width//8 + 1
+         
+        buf = [0xFF] * (linewidth * self.height)
+        image_monocolor = image.convert('1')
+        imwidth, imheight = image_monocolor.size
+        pixels = image_monocolor.load()
+        
+        if(imwidth == self.width and imheight == self.height):
+            print("Vertical")
+            for y in range(imheight):
+                for x in range(imwidth):                    
+                    if pixels[x, y] == 0:
+                        # x = imwidth - x
+                        buf[x // 8 + y * linewidth] &= ~(0x80 >> (x % 8))
+        elif(imwidth == self.height and imheight == self.width):
+            print("Horizontal")
+            for y in range(imheight):
+                for x in range(imwidth):
+                    newx = y
+                    newy = self.height - x - 1
+                    if pixels[x, y] == 0:
+                        # newy = imwidth - newy - 1
+                        buf[newx // 8 + newy*linewidth] &= ~(0x80 >> (y % 8))
+        return buf   
+
+        
+    def display(self, image):
+        if self.width%8 == 0:
+            linewidth = self.width//8
+        else:
+            linewidth = self.width//8 + 1
+
+        self.SetWindows(0, 0, EPD_WIDTH, EPD_HEIGHT);
+        for j in range(0, self.height):
+            self.SetCursor(0, j);
+            self.send_command(0x24);
+            for i in range(0, linewidth):
+                self.send_data(image[i + j * linewidth])   
+        self.TurnOnDisplay()
+    
+    def Clear(self, color):
+        if self.width%8 == 0:
+            linewidth = self.width//8
+        else:
+            linewidth = self.width//8 + 1
+
+        self.SetWindows(0, 0, EPD_WIDTH, EPD_HEIGHT);
+        for j in range(0, self.height):
+            self.SetCursor(0, j);
+            self.send_command(0x24);
+            for i in range(0, linewidth):
+                self.send_data(color)   
+        self.TurnOnDisplay()
+
+    def sleep(self):
+        self.send_command(0x10) #enter deep sleep
+        # self.send_data(0x01)
+        epdconfig.delay_ms(100)    
+
+### END OF FILE ###
+

2.13inch_e-paper_code/RaspberryPi/python3/epdconfig.py

@@ -0,0 +1,73 @@
+# /*****************************************************************************
+# * | File        :	  EPD_1in54.py
+# * | Author      :   Waveshare team
+# * | Function    :   Hardware underlying interface
+# * | Info        :
+# *----------------
+# * |	This version:   V2.0
+# * | Date        :   2018-11-01
+# * | Info        :   
+# * 1.Remove:
+#   digital_write(self, pin, value)
+#   digital_read(self, pin)
+#   delay_ms(self, delaytime)
+#   set_lut(self, lut)
+#   self.lut = self.lut_full_update
+# ******************************************************************************/
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+
+
+import spidev
+import RPi.GPIO as GPIO
+import time
+
+# Pin definition
+RST_PIN         = 17
+DC_PIN          = 25
+CS_PIN          = 8
+BUSY_PIN        = 24
+
+# SPI device, bus = 0, device = 0
+SPI = spidev.SpiDev(0, 0)
+
+def digital_write(pin, value):
+    GPIO.output(pin, value)
+
+def digital_read(pin):
+    return GPIO.input(BUSY_PIN)
+
+def delay_ms(delaytime):
+    time.sleep(delaytime / 1000.0)
+
+def spi_writebyte(data):
+    SPI.writebytes(data)
+
+def module_init():
+    GPIO.setmode(GPIO.BCM)
+    GPIO.setwarnings(False)
+    GPIO.setup(RST_PIN, GPIO.OUT)
+    GPIO.setup(DC_PIN, GPIO.OUT)
+    GPIO.setup(CS_PIN, GPIO.OUT)
+    GPIO.setup(BUSY_PIN, GPIO.IN)
+    SPI.max_speed_hz = 2000000
+    SPI.mode = 0b00
+    return 0;
+
+### END OF FILE ###

2.13inch_e-paper_code/RaspberryPi/python3/main.py

@@ -0,0 +1,69 @@
+#!/usr/bin/python
+# -*- coding:utf-8 -*-
+
+import epd2in13
+import time
+from PIL import Image,ImageDraw,ImageFont
+import traceback
+
+try:
+    epd = epd2in13.EPD()
+    epd.init(epd.lut_full_update)
+    epd.Clear(0xFF)
+
+    # # read bmp file on window
+    # print("read bmp file on window")
+    # epd.Clear(0xFF)
+    # image1 = Image.new('1', (epd2in13.EPD_WIDTH, epd2in13.EPD_HEIGHT), 255)  # 255: clear the frame
+    # bmp = Image.open('100x100.bmp')
+    # image1.paste(bmp, (10,10))    
+    # epd.display(epd.getbuffer(image1))
+    # time.sleep(2)
+    
+    # # Drawing on the image
+    # image2 = Image.new('1', (epd2in13.EPD_HEIGHT, epd2in13.EPD_WIDTH), 255)  # 255: clear the frame
+    # # read bmp file 
+    # print("read bmp file")
+    # epd.Clear(0xFF)
+    # image2 = Image.open('2in13.bmp')
+    # epd.display(epd.getbuffer(image2.rotate(180)))    
+    
+    # print("Drawing")  
+    # epd.Clear(0xFF)    
+    # image = Image.new('1', (epd2in13.EPD_HEIGHT, epd2in13.EPD_WIDTH), 255)  # 255: clear the frame
+    # draw = ImageDraw.Draw(image)    
+    # draw.rectangle([(0,0),(50,50)],outline = 0)
+    # draw.rectangle([(55,0),(100,50)],fill = 0)
+    # draw.line([(0,0),(50,50)], fill = 0,width = 1)
+    # draw.line([(0,50),(50,0)], fill = 0,width = 1)
+    # draw.chord((10, 60, 50, 100), 0, 360, fill = 0)
+    # draw.ellipse((55, 60, 95, 100), outline = 0)
+    # draw.pieslice((55, 60, 95, 100), 90, 180, outline = 0)
+    # draw.pieslice((55, 60, 95, 100), 270, 360, fill = 0)
+    # draw.polygon([(110,0),(110,50),(150,25)],outline = 0)
+    # draw.polygon([(190,0),(190,50),(150,25)],fill = 0)
+    # font15 = ImageFont.truetype('/usr/share/fonts/truetype/wqy/wqy-microhei.ttc', 15)
+    # draw.text((120, 60), 'e-Paper demo', font = font15, fill = 0)
+    # # draw.text((110, 80), 'Hello world', font = font15, fill = 0)
+    # epd.display(epd.getbuffer(image.rotate(180)))
+    # time.sleep(2)
+    
+    # # partial update
+    # print("Show time")
+    # epd.init(epd.lut_partial_update)
+    # font24 = ImageFont.truetype('/usr/share/fonts/truetype/wqy/wqy-microhei.ttc', 24)
+    # # time_image = Image.new('1', (epd2in13.EPD_HEIGHT, epd2in13.EPD_WIDTH), 255)
+    # draw = ImageDraw.Draw(image)
+    # while (True):
+        # draw.rectangle((120, 80, 220, 105), fill = 255)
+        # draw.text((120, 80), time.strftime('%H:%M:%S'), font = font24, fill = 0)
+        # # newimage = time_image.crop([10, 10, 120, 50])
+        # # time_image.paste(newimage, (10,10))  
+        # epd.display(epd.getbuffer(image.rotate(180)))
+        
+    # epd.sleep()
+        
+except:
+    print( 'traceback.format_exc():\n%s',traceback.format_exc())
+    exit()
+

2.13inch_e-paper_code/RaspberryPi/python3/readme.txt

@@ -0,0 +1,92 @@
+/******************************************************************************
+ * File Name          : readme.txt
+ * Description        : Readme file
+ * Date               : 2019-04-08
+ ******************************************************************************
+ *
+ * Copyright (c) 2017 Waveshare
+ * All rights reserved.
+ *
+ * THIS SOFTWARE IS PROVIDED BY COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
+ * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT 
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
+ * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+ * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT 
+ * SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+  
+  == Development Environment ==
+  * OS: Raspbian for Raspberry Pi
+  * Libraries required: 
+        SPI library of Python
+        PIL (Python Imaging Library) library
+
+  == Raspberry Pi GPIO Pin map ==
+ +-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
+ | BCM | wPi |   Name  | Mode | V | Physical | V | Mode | Name    | wPi | BCM |
+ +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
+ |     |     |    3.3v |      |   |  1 || 2  |   |      | 5v      |     |     |
+ |   2 |   8 |   SDA.1 |   IN | 1 |  3 || 4  |   |      | 5v      |     |     |
+ |   3 |   9 |   SCL.1 |   IN | 1 |  5 || 6  |   |      | 0v      |     |     |
+ |   4 |   7 | GPIO. 7 |   IN | 1 |  7 || 8  | 1 | ALT5 | TxD     | 15  | 14  |
+ |     |     |      0v |      |   |  9 || 10 | 1 | ALT5 | RxD     | 16  | 15  |
+ |  17 |   0 | GPIO. 0 |   IN | 0 | 11 || 12 | 0 | IN   | GPIO. 1 | 1   | 18  |
+ |  27 |   2 | GPIO. 2 |   IN | 0 | 13 || 14 |   |      | 0v      |     |     |
+ |  22 |   3 | GPIO. 3 |   IN | 0 | 15 || 16 | 0 | IN   | GPIO. 4 | 4   | 23  |
+ |     |     |    3.3v |      |   | 17 || 18 | 0 | IN   | GPIO. 5 | 5   | 24  |
+ |  10 |  12 |    MOSI | ALT0 | 0 | 19 || 20 |   |      | 0v      |     |     |
+ |   9 |  13 |    MISO | ALT0 | 0 | 21 || 22 | 0 | IN   | GPIO. 6 | 6   | 25  |
+ |  11 |  14 |    SCLK | ALT0 | 0 | 23 || 24 | 1 | OUT  | CE0     | 10  | 8   |
+ |     |     |      0v |      |   | 25 || 26 | 1 | OUT  | CE1     | 11  | 7   |
+ |   0 |  30 |   SDA.0 |   IN | 1 | 27 || 28 | 1 | IN   | SCL.0   | 31  | 1   |
+ |   5 |  21 | GPIO.21 |   IN | 1 | 29 || 30 |   |      | 0v      |     |     |
+ |   6 |  22 | GPIO.22 |   IN | 1 | 31 || 32 | 0 | IN   | GPIO.26 | 26  | 12  |
+ |  13 |  23 | GPIO.23 |   IN | 0 | 33 || 34 |   |      | 0v      |     |     |
+ |  19 |  24 | GPIO.24 |  OUT | 1 | 35 || 36 | 1 | OUT  | GPIO.27 | 27  | 16  |
+ |  26 |  25 | GPIO.25 |   IN | 0 | 37 || 38 | 0 | IN   | GPIO.28 | 28  | 20  |
+ |     |     |      0v |      |   | 39 || 40 | 0 | IN   | GPIO.29 | 29  | 21  |
+ +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+
+ | BCM | wPi |   Name  | Mode | V | Physical | V | Mode | Name    | wPi | BCM |
+ +-----+-----+---------+------+---+---Pi 3---+---+------+---------+-----+-----+
+
+  == Hardware connection ==
+    EPD    =>    Raspberry Pi
+  * VCC    ->    3.3
+  * GND    ->    GND
+  * DIN    ->    MOSI
+  * CLK    ->    SCLK
+  * CS     ->    24 (Physical, BCM: CE0, 8)
+  * D/C    ->    22 (Physical, BCM: 25)
+  * RES    ->    11 (Physical, BCM: 17)
+  * BUSY   ->    18 (Physical, BCM: 24)
+  
+    == How to use ==
+    1, open spidev.
+        spi is enabled in config.txt:
+        dtparam=spi=on
+    or in shell:
+        sudo raspi-config
+            - 5 Interfacing Options  Configure connections to peripherals
+                - 5 Interfacing Options  Configure connections to peripherals
+        
+    2, install the Python libraries.
+        sudo apt-get install python-pip 
+        sudo pip install RPi.GPIO
+        sudo pip install spidev
+        sudo apt-get install ttf-wqy-zenhei ttf-wqy-microhei
+
+    3, change the current directory to where the demo files located.
+
+    4, run the demo with: 
+        sudo python main.py
+    # if use python3:
+        sudo python3 main.py
+*/
+