# Sample udhcpd configuration file (/etc/udhcpd.conf)
# Values shown are defaults

# The start and end of the IP lease block
start		192.168.255.100
end		192.168.255.200

# The interface that udhcpd will use
interface       eth0

# The maximum number of leases (includes addresses reserved
# by OFFER's, DECLINE's, and ARP conflicts). Will be corrected
# if it's bigger than IP lease block, but it ok to make it
# smaller than lease block.
max_leases	100

# The amount of time that an IP will be reserved (leased to nobody)
# if a DHCP decline message is received (seconds)
#decline_time	3600

# The amount of time that an IP will be reserved
# if an ARP conflict occurs (seconds)
#conflict_time	3600

# How long an offered address is reserved (seconds)
#offer_time	60

# If client asks for lease below this value, it will be rounded up
# to this value (seconds)
#min_lease	60

# The location of the pid file
#pidfile	/var/run/udhcpd.pid

# The location of the leases file
#lease_file	/var/lib/misc/udhcpd.leases

# The following are BOOTP specific options
# next server to use in bootstrap
siaddr		192.168.255.2	# default: 0.0.0.0 (none)
# tftp server name
#sname		zorak		# default: none
# tftp file to download (e.g. kernel image)
boot_file	pxelinux.0	# default: none

# NOTE: "boot_file FILE" and "opt bootfile FILE" are conceptually the same,
# but "boot_file" goes into BOOTP-defined fixed-size field in the packet,
# whereas "opt bootfile" goes into DHCP option 0x43.
# Same for "sname HOST" and "opt tftp HOST".

# The remainder of options are DHCP options and can be specified with the
# keyword 'opt' or 'option'. If an option can take multiple items, such
# as the dns option, they can be listed on the same line, or multiple
# lines.
# Examples:
#opt	dns	192.168.10.2 192.168.10.10
option	subnet	255.255.255.0
opt	router	192.168.255.2
option	lease	3600